Oki Teriostar LP-1040-MF - Replacing the Charger Unit; Charger Unit Replacement Procedure

6161
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Replacing the Charger Unit
The following explains the procedure for replacing the charger unit.

Charger Unit Replacement Procedure
1
By pressing the POWER button on the
operation panel, turn the Printer o.
2
Put the document table in the vertical
position.
MF
3
Lift the latch lever, and open the fuser
unit drawer.
4
By rotating the right and left outer-
side knobs counterclockwise,
release the process cartridge
drawer's lock.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6