Oki Teriostar LP-1040-MF - Page 103

103
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
n
Scanner
MF
z
TWAIN Port Address
Sets the command port (TCP) for TWAIN driver connection.
<Parameter by entering numbers>
0 to 65535 Default value: 30000
z
TWAIN Data Port Address
Sets the data port (TCP) for when the TWAIN driver is used for connection.
<Parameter by entering numbers>
0 to 65535 Default value: 32000
z
TWAIN Connection Timeout
Sets the timeout period if the response from the driver stops during TWAIN driver
connection. When the set time elapses, the TWAIN mode is exited.
<Parameter by selecting options>
n
: Default value
n
30 minutes Performs timeout after 30 minutes.
60 minutes Performs timeout after 60 minutes.
90 minutes Performs timeout after 90 minutes.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6