Oki Teriostar LP-1040-MF - Page 125

125
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
n
Con. OtherPaper in ContinuousMode
Sets whether to continue printing with a dierent large paper roll when paper has
run out in continuous mode.
In principle, the default setting should be used.
<Parameter by selecting options>
n
: Default value
n
On Continues with a dierent paper.
O Does not continue with a dierent paper.
n
Con. Other Paper in Optimal Mode
Sets whether to continue printing with a dierent large paper roll when paper has
run out in optimal mode.
In principle, the default setting should be used.
<Parameter by selecting options>
n
: Default value
n
O Does not continue with a dierent paper.
On Continues with a dierent paper.
n
Con. Other Paper w/ Auto Rotation
In case the paper has run out when Paper Size is set to Standard Size, the Printer
can continue printing on a dierent paper by rotating the drawing.
When the paper runs out in Con. Other Paper w/ Auto Rotation, the Printer continues
printing on a dierent paper and rotates the drawing to match the roll width.
In principle, the default setting should be used.
<Parameter by selecting options>
n
: Default value
n
On Continues with a dierent paper.
O Does not continue with a dierent paper.
n
A4 Direcw/ ActualSize&Continuous
When Size of Automatically Supplied Paper is set to A Series, Paper Supply
Mode is set to Continuous, and Page Size is set to Actual Size, the Printer prints
all drawings in portrait orientation.
Only A4 drawings can be printed in landscape orientation.
In principle, the default setting should be used.
<Parameter by selecting options>
n
: Default value
n
Short Edge Firs Prints in portrait orientation.
Long Edge First Prints in landscape orientation.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6