Oki Teriostar LP-1040-MF - Page 151

151
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
n
Distance from Paper Edges
This parameter species distance of the stamp from the paper edges.
<Parameter by entering numbers>
1 to 10 Default value = 5, Unit in mm
n
Characters Height
This parameter species the height of the stamp characters.
<Parameter by entering numbers>
2 to 10 Default value = 4, Unit in mm
n
Stamped items 1 to 3
These parameters specify to print stamps (Reception date and time, User specied,
and User name) and the printing order.
<Parameter by entering numbers>
n
Not Specied Does not print stamp.
Reception Date and Time Prints the date and time when the Printer received the
print data.
User Specied Prints the character string (0 to 16 characters) specied in
Stamped Character String.
User name Prints the name of the user logged in the PC.
z
Example
With the following stamped items setting,
Stamped item 1: User Name
Stamped item 2: User Specied
Stamped item 3: Reception Date and Time
Stamped character string: CONFIDENTIAL
if print data is received on December 23, 2010, at 12:34:56 p.m. from a computer with
user logged in, the following stamp is printed.
user CONFIDENTIAL 2010/12/23 12:34:56
Stamped item 1 Stamped item 2 Stamped item 3
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6