Oki Teriostar LP-1040-MF - Page 214

214
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
User authentication

Authentication in print mode
1
When using the printer driver, set the authentication code to the
authentication sheet of the printer driver and print.
When the parameter used to authenticate the user during print authentication is set to
the default value Use PC Login Name, it is not necessary to congure the printer driver
Authentication sheet.
See
&
page 206 for more details on the parameter used to authenticate the user during
print authentication.
When the parameter used to authenticate the user during print authentication is set Use
PrinterDriver Setting, you need to set your own authentication code in the printer driver
Authentication sheet.
Print data received by the Printer will not be printed and will remain in the Printer until the
authentication code is entered.
2
-a
Read the smart card with the card
reader.
With smart card authentication, users are
authenticated on the Ready screen when they
read their smart card with the card reader.
After successful authentication, the
Authenticated Printing screen in
5
is displayed.
2
-b
Press PRINT.
The Print mode top screen appears.
Before Use Basic Operations Menu Functions
Print Job Box
Function
Authentication
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5
6