Odometer (Electronic and
LSS
Clusters)
RPM
X
1000
Your odometer shows how
far
your vehicle has been driven
in
either miles (used
in
the United States) or kilometers
(used
in
Canada).
Press the
EM
(EnglishMetric) button
on the
left
side of the instrument cluster
to
switch the
display between miles and kilometers. Pressing
the
E/M
button
will
also
cycle
all
other displays through English and
metric units.
Your Oldsmobile has a tamper resistant odometer. The
odometer will read
ERROR
if
someone has tampered
with it.
You may wonder what happens
if
your vehicle needs a
new odometer installed. If the new one can be set to the
mileage total
of
the old odometer, then it must be. But
if
it can’t, then it’s set at zero and a label must be put on
the driver’s door to show the old mileage reading when
the new odometer was installed.
Trip
Odometer (Electronic and
LSS
Clusters)
Your trip odometer tells how
far
you have driven,
in
either miles or lulometers, since you last reset it. Press
the
EM
(EnglisMetric) button on the left side of the
instrument cluster to switch the display between
miles
and kilometers.
The trip odometer is displayed by pressing the
TRIP
button.
To
reset
it
to
zero, press TRIP to display the trip
odometer, then hold the button for about three seconds
until the display resets.
2-55
To Next Page
Loading...
