Oldsmobile 1995 88 - To Set Cruise Control

To Set Cruise Control
1. Move the cruise control
switch to
ON.
2. Get up to the speed you want.
3. Push in the SET button at the end of the lever and
release
it.
To Resume a Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts
off
the cruise control. But you don’t need to reset it.
Once you’re going about
25 mph (40 km/h) or more,
you can move the cruise
control switch from
ON to
RfA (Resume/Accelerate)
for about half a second.
You’ll
go right back up to your chosen speed and stay
there.
If you hold the switch at R/A longer than half a second,
the vehicle will keep going faster until you release the
switch or apply the brake. You could be startled and
even lose control.
So unless you want to go faster, don’t
hold the switch at
R/A.
4. Take your foot off the accelerator pedal.
2-33