SEL
4
:
Press this button to change between the two
functions in each category. The functions found in each
category
are:
Fuel: Fuel Used and Fuel Range
Economy: Instant and Average Fuel Economy since
last reset
0
Gages: Tachometer and Battery Voltage
Oil:
Oil Pressure and Oil Life since last reset
Date/ET: Date and Elapsed Time since last reset
ON/OFF:
Press
this
button to turn the system on or
off.
When
off,
the DIC will continue to display diagnostic
messages as necessary. When you turn the system back
on, any current diagnostic messages will be displayed
again. If there are no current messages, MONITORED
SYSTEMS
OK
will be displayed.
RE-SET
This button is used with other buttons to reset
the system functions.
It
is also used to shut off the chime
with most diagnostic messages.
Driver Information Center Displays
UNLEADED
FUEL
ONLY
When you turn on the ignition, the Driver Information
Center (DIC) displays:
INFORMATION CENTER
If
no problems are detected, the screen will return to the
mode selected when the ignition was turned
off.
If
a problem is detected, a chime will sound and the
diagnostic message will be displayed. Except for the
messages HOT
...
STOP ENGINE, LOW BRAKE
FLUID, LOW PRES STOP ENGINE (low oil pressure),
and PARKING BRAKE SET, the message and chime
can be shut
off
by
pressing RESET.
If
the message
PARKING
BRAKE
SET or LOW BRAKE
FLUID
is
2-69
To Next Page
Loading...
