Oldsmobile 1995 88 - Convex Outside Mirror

2. Hold in the calibration switch for five seconds until the
current zone entry number appears in the display. To
hold in the calibration switch, insert a paper clip into
the small hole on the bottom of the mirror housing.
3. Repeatedly press the calibration switch until the
number for the new zone entry
is displayed.
unce the desired zone number is displayed, stop
pressing the calibration switch and the display will show
compass direction within a few seconds.
Convex Outside Mirror
Your passenger’s side mirror is convex.
A convex mi~~or’s surface is curved so you can see more
from the driver’s seat.
Manual Remote Control Mirrors
The outside rearview
mirrors should be adjusted
so you can just see the side
of your vehicle and the area
behind your vehicle when
you are sitting in a
comfortable driving
position.
Adjust the driver’s side outside mirror with the lever on
the driver’s door.