Console Shift Lever
set the parking brake.
1.
Hold the brake pedal down with your right foot and
2.
Move the shift lever into the PARK
(P)
position as
follows:
Hold in the button on the lever;
@
Push the lever all the way toward the front of
your vehicle.
3.
Move the ignition key to
LOCK.
4.
Remove the key and take it with you. If you can
walk away from your vehicle with the ignition key in
your hand, your vehicle is in PARK
(P).
Leaving
Your
Vehicle With the Engine
Running
If you have to leave your vehicle with the engine
running, be sure your vehicle is in PARK (P) and your
parking brake is firmly set before you leave
it.
After
you’ve moved the shift lever into PARK (P) position,
hold the regular brake pedal down. Then, see
if
you can
move the shift lever away from PARK (P) without first
pulling it toward you (or, if you have the console shift
lever, without first pushing the button).
If
you can,
it
means that the shift lever wasn’t fully locked into
PARK
(P).
2-23
To Next Page
Loading...
