displayed, only the chime can be shut
off
by pressing
RESET.
If
the message HOT. ..STOP ENGINE or
LOW
PRES STOP ENGINE is displayed, neither the chime
nor the message can be shut
off
the problem requires
immediate attention. The chime associated with a
diagnostic message will shut
off
when either
SEL
is
pressed to view other functions.
If
there are multiple diagnostic messages, each will be
displayed for
two
seconds; then the system will display
the next message. All displays are updated continuously.
To
change the DIC display,
and all other displays, to
English or metric units,
press the
EM
button.
Fuel
Used
Press SEL until FUEL is selected in the display
directly above the
DIC
controls. Press
SEL
4
if
necessary to display how much fuel has been used since
you last pressed the reset button. The display will show
a reading such as:
10.4
GALLONS USED or
39.3
LITERS
USED
To learn how much fuel will be used from a new starting
point, first display fuel used, then press RESET until
RESET appears in the display (about one second).
If RESET is pressed and held for at least five seconds,
fuel used, fuel range, average fuel economy, and elapsed
time will
all
be reset and
TRIP
FUNCTIONS
RESET
will
be
displayed.
Do
not confuse fuel used with the amount of fuel
remaining in your tank.
To Next Page
Loading...
