display and the equalization will
be
adjusted
automatically. If you select a tone setting for your tape,
it will be activated when you play another tape.
NR:
This radio has Dolby@B Noise Reduction to reduce
background noise on Dolby@B encoded tapes. Press this
button to reduce background noise on your tape. The
Dolby symbol will appear in the display. Dolby@ Noise
Reduction is manufactured under license from Dolby
Laboratories Licensing Corporation. Dolby@ and the
symbol
are
trademarks of Dolby Laboratories
Licensing Corporation.
SEEK:
When you press
SEEK
while playing a tape, it
will search for the next hlgher or lower selection and stop.
SCAN:
When you press SCAN while playing a tape,
you’ll hear the fiist few seconds of each selection. Press
SCAN again to stop on a selection. The tape will be muted
while scanning and SCAN will appear on the display.
FWD:
Press FWD (fast forward) to advance a cassette
tape rapidly; press again to play the tape.
REV:
Press
REV
to reverse a cassette tape rapidly; press
again to play the tape.
If Cln (clean) appears on the display when you insert
cleaned. It will still play cassette tapes, but it should be
cleaned to prevent damage to your cassette tapes and the
cassette tape player. See “Cassette Tape Player Care”
later in this section. After you have cleaned the cassette
1
tape player, press and hold EJECT for
5
seconds to reset
the Cln indicator. The radio will display
“---”
to show
that the clean feature has been reset.
If
E
and a number appears on the display at any time,
an
error has occurred. See “Cassette Tape and CD Errors”
later in this section.
~
I
your cassette tape, your cassette player needs to be
I
PROG:
Press
PROG
(program) to play
the
other side of
a tape.
TAPE/AUX:
If you have a tape inserted and the radio
is
playing, press TAPE/AUX to play your tape. To return
to the radio while the tape is playing, press AMEM. The
tape will remain safely inside the radio for future
listening.
EJECT
Press to eject the cassette tape. The radio will
then play.
3-16
To Next Page
Loading...
