;tape player, press and hold EJECT for five seconds to
reset the Cln indicator. The radio will display
“---”
to
$how that the clean feature has been reset.
If
E and a number appears on the display at any time, an
error has occurred. See “Cassette Tape and CD Errors”
later in this section.
NR:
This radio has Dolby@B Noise Reduction to reduce
background noise
on
Dolby
B
encoded tapes. When
playing a cassette tape, press this button to reduce
background noise on your tape. The Dolby symbol will
appear in the display. Dolby Noise Reduction
is
manufactured under license from Dolby Laboratories
Licensing Corporation. Dolby@ and the
00
symbol
are
trademarks
of
Dolby Laboratories Licensing Corporation.
A
SEEK
v:
When you press SEEK while playing a tape,
it will search for the next higher
or
lower selection and
stop.
SCAN:
When you press SCAN while playing a tape,
you’ll hear the first few seconds
of
each selection. Press
SCAN again
to
stop on a selection. The tape will be muted
while scanning and
SCAN
will appear on the display.
FWD:
Press
FWD
(fast forward) to advance a cassette
tape rapidly; press again to play the tape.
REV:
Press
REV
(reverse) to reverse a cassette tape
rapidly; press again to play the tape.
PROG:
Press PROG (program) to play the other side of
the tape.
TAPE/CD:
If
you have a tape inserted and the radio
is
playing, press TAPE/CD to play your tape. To return to
the radio while the tape is playing, press
AMEM.
You
can
also
press TAPE/CD to change between a tape and
a
compact disc if both are inserted. The inactive tape or CD
will remain safely inside the radio for future listening.
EJECT
Press to eject the cassette tape. The radio will
then play.
Playing a Compact
Disc
The CD player will play either normal-size discs or the
smaller
8
cm discs without
an
adapter.
With the ignition on, insert the disc partway into the
slot, with the label side up. The player should pull it in
and it will begin playing.
Note that when the disc
is
inserted, CD will be
displayed. When the disc is playing, CD
with
a box
around it will be displayed.
If
you select a
TONE
setting
for your CD, it will be activated each time you play a
CD.
As
each new track starts to play, the track number will
appear
in
the display.
3-20
To Next Page
Loading...
