;
.
i'
.I
Door
Open
Reminder:
If
you have the information
center and a door
is
not fully closed when the transaxle
is
in
gear,
a
chime will sound and the information center
will display one of these messages:
DRIVER
DOOR AJAR
PASSENGER
DOOR
AJAR
REAR
DOOR
AJAR
Programmable Automatic
Door
Locks
(Option)
Just close your doors and turn
on
the ignition. Every
time you move your shift lever out of PmK
(P),
all
of
the doors will lock., And, every time you stop and move
your shift lever into PARK
(P),
your doors will unlock.
If
someone needs to get out while you're not in PARK
(P),
have that person use the manual or power lock.
When the door
is
closed again, it will not lock.
automatically. Just use the manual or power lock to lock
the door again.
i""
~
'
You can program the automatic door lock feature to
allow the doors to remain locked after you shift into
PARK
(P).
1.
Close your doors and
turn
the ignition on.
2.
Keep your foot on the brake pedal.
3.
Press and hold the driver's power door lock switch.
4.
Move your shift lever out of PARK
(P),
then move
5.
Release the lock switch.
Yourdoors will now lock when you
shift
out of
PARK (P), and remain locked until you use the manual
or power door unlock switch.
To
reprogram the door locks to lock and unlock when
you shift in and out of
PARK
(P)
do the following:
1.
Close your doors and
turn
the ignition on.
2.
Keep your foot on the brake pedal.
3.
Press and hold the driver's power
door
unlock
4.
Move the shift lever out
of
PARK
(P),
then move the
5.
Release the unlock switch.
the shift lever back into
PARK
(P).
switch.
shift lever back into PARK
(P).
To Next Page
Loading...
