Comfort
Controls
&Audio
Systems
Ekctronic
Climate
Control
114
(Cont.)
temperature caused by sunlight.
To
keep you comfortable, it reduces the
interior temperature by as much as 5°F
(3°C) below the setting
on
the digital
screen.
AUTO:
To allow the system to
automatically control the temperature,
air distribution and fan speed:
1.
Set the temperature you want with
the
COOL/WARM
switch.
2.
Press the
AUTO
switch. The
AUTO
symbol will appear on the digital
screen.
The system will approach the
temperature you select as quickly as
possible. For most efficient operation,
just set the system temperature where
you would like it and drive away.
OUTS
TEMP:
Press to have the
outside temperature displayed on the
digital screen. Press again to return to
the inside temperature setting.
If the system is left in the outside
temperature mode, the outside
temperature will be displayed except
when changing the inside temperature
setting using the
COOL/WARM
switch. The display will return to the
outside temperature setting in about
five seconds.
Use the following controls when the
system is not set on
AUTO:
8:
Press the top of the switch to raise
the fan speed, the bottom of the switch
to lower the fan speed. The fan symbol
and bar graph will be displayed on the
digital screen.
When the
AUTO
switch is pressed, the
fan symbol will go out and the fan will
return to automatic operation.
If the Fahrenheit (F") or Celsius (C")
symbol begins to flash, or flashes when
you turn on the ignition,
it
indicates an
electrical problem with your air
conditioning system. The flashing
will
continue for about two minutes. It
means
you
should have your system
serviced.
To Next Page
Loading...
