4.
Now adjust the vertical aim. Check
the vertical aim for each headlight
and adjust it as necessary.
5.
Turn the vertical aiming screw until
the bubble
in
the level is centered at
0
(zero).
To
Replace a Headlight
(2-DOOR
MODELS)
Before replacing a headlight that does
not light, check to make sure that the
wiring connector is securely fastened to
it.
See the
Index
under
Replacement
Bulbs
to check the size and type of
headlight
you
need to use before you
begin
to
replace the headlight.
You
must replace a headlight with one that
is exactly the same.
1.
Pry
up the plastic pins and remove
the headlight cover.
243
To Next Page
Loading...
