Service
&
Appearance Care
254
Tire Inspection and Rotation
To
make your tires last longer, have
them inspected and rotated at the
mileages recommended in the
Maintenance Schedule. See the
Index
under
Scheduled Maintenance
Services.
Use this rotation pattern.
After the tires have been rotated, adjust
the front and rear inflation pressure as
shown on the Tire-Loading Information
label. Make certain that all wheel nuts
are properly tightened. See the
Index
under
Wheel
Nut
Torque.
A
Rust or dirt on a wheel, or on
the parts to which it is
fastened, can make the wheel nuts
become loose after a time. The
wheel could come
off
and cause an
accident. When you change a
wheel, remove any rust or dirt from
places where the wheel attaches to
the vehicle. In an emergency, you
can use a cloth or a paper towel to
do this; but be sure to use a scraper
or wire brush later, if you need to,
to get all the rust or dirt
off.
(See
the
Index
under
Changing
a
Flat
Tire.
1
To Next Page
Loading...
