3.1
L
V6: Checking Automatic Transaxle
I
Fluid
Twin Dual Cam 3.4L V6: Checking
Automatic Transaxle Fluid
How
to
Add
Transaxle
Fluid
Refer to the Maintenance Schedule to
determine what kind of transaxle fluid
to use. See the
Index
under
Fluids
and
Lubricants.
If the fluid level is low, add only enough
of the proper fluid to bring the fluid
level into the cross-hatched area on the
dipstick.
It
doesn’t take much fluid,
generally less than a pint
(0.5L).
Don’t
overfill. We recommend you use only
fluid labeled
DEXRON*-HE,
because
fluids with that label are made
especially for your automatic transaxle.
Damage caused by fluid other than
DEXRONB-UE is not covered by your
new vehicle warranty.
After adding fluid, recheck the fluid
level as described under
How
to
Check.
When the correct fluid level is obtained,
push the dipstick back in all the way.
3.1
L V6 Adding Automatic Transaxle
Fluid
Twin Dual Cam 3.4LV6: Adding
Automatic Transaxle Fluid
r-
233
To Next Page
Loading...
