70
Features
&
Controls
Turn Signal and Lane Change
Indicator
(CONT.)
A
green arrow on the instrument panel
will flash in the direction of the turn or
lane change.
To signal a lane change, just raise or
lower the lever until the green arrow
starts to flash. Hold it there until you
complete your lane change. The lever
will return by itself when you release it.
As
you signal a turn or a lane change, if
the arrows don’t flash but just stay on,
a
signal bulb may be burned out and
other drivers won’t see your turn signal.
If a bulb is burned out, replace it to help
avoid an accident.
If
the green arrows
don’t go on at all when
you
signal a
turn, check the fuse (see the
Index
under
Fuses
G
Circuit Breakers)
and
for burned-out bulbs.
A
warning chime will remind you
if
you
have left your turn signal on for more
than
‘/2
mile
(-8
km) of driving.
.
Cruise
Control
(OPTION)
With cruise control, you can maintain a
speed of about
25
mph
(40
lun/h) or
more without keeping your foot on the
accelerator. This can really help on long
trips.
Cruise control does not work at speeds
below about
25
mph
(40
lun/h).
When you apply your brakes, the cruise
control shuts off.
To Next Page
Loading...
