Comfort Controls
&Audio
Systems
128
AMIFM
Stereo with Cassette
Player and Graphic Equalizer
(CONT.)
Tape Player
Your tape player sets itself automatically
for tape bias. This audio system has
automatic
00
Dolby
B
NR@ to reduce
background noise on Dolby encoded
tapes. Dolby@ Noise Reduction is
manufactured under license from Dolby
Laboratories Licensing Corporation.
Dolby@ and the
00
symbol are
trademarks of Dolby Laboratories
Licensing Corporation.
Press
POWER
to turn the radio on.
Then push a cassette into the cassette
entry door (the tape side goes in first).
Using tapes that are longer than
90
minutes (45 minutes on each side) is
not recommended.
FWD
(Fast Forward):
Press to
advance the tape rapidly; press again
to play. (The radio plays while a tape
is fast forwarding.)
REV
(Reverse)
:
Press to reverse the
tape rapidly; press again
to
play tape.
(The radio plays while a tape is
rewinding.)
SEEK:
Press to advance the tape to the
beginning of the next selection.
REPT (Repeat)
:
Press to rewind the
tape to the beginning of a selection.
PROG (Program):
Press to change
the side of tape being played. When the
arrow pointing up is lighted, the
selections listed on the top side of the
tape are played. When the arrow
pointing down is lighted, selections
listed on the bottom side of the tape are
played. The tape player automatically
begins playing the other side when it
reaches the end of the tape.
CRO,:
This button sets tape bias.
When playing high bias chrome or metal
tapes, press the button to turn the
button light on. When playing standard
tapes, press again to turn the light
off.
EJECT:
Press to have the cassette tape
ejected (the radio will then play).
To Next Page
Loading...
