5
ENGLISH
5. Program a Fixed Price Look-Up (PLU)
Up to 200 PLUs can be programmed.
1. Control dial position: PRG
2. Press
, type the [PLU number (between 1 and
200)] and then press .
3. Type the [unit price] that you wish to assign to the PLU.
4. Press the related department
to key to assign
the PLU to a Department from 1 to 14. If tax is required
for a particular PLU item, be sure to link the PLU number
related to the item to a department that is programmed for
tax. To program a department for tax, refer to the section
Link a Multiple/Single Item Sale, Tax Status and Item
Price to a Department.
5. Press .
Example: Create PLU 1 with a unit price of £2.69
assigned to Department 3.
Type/Press:
After you have programmed your PLU items, you can print a
report that indicates the programmed values. See section
"PLU Programming Report" for details.
PLU number
PLU price
Department
Cash Register Programming and
Features
Programs and transaction information for management re-
ports are stored in the memory of the cash register which is
protected by back-up batteries.
Before beginning to program the cash register or to
perform sales transactions, insert the batteries to save
this information if a power failure occurs or if you unplug
the cash register from the power outlet.
Making Changes to Cash Register
Programming
If you wish to make a change to your initial programming
(such as an update to VAT rates, PLUs or exchange rates):
• Turn the control dial to the PRG position.
• Re-do the program in question and confirm as explained
in the next sections
• Turn the control dial to another operating mode.
A new program entry will automatically overwrite a previous
entry for the same program.
Percent Discount (-%)
Setting this option automatically calculates the preset rate
each time the
key is pressed. The percentage rate can
be discounted from an individual item or from a sales trans-
action total.
1. Control dial position: PRG.
2. Type the [numbers] representing the desired percentage
rate. Up to four digits ranging from 0.00 to 99.99 can be
used.
3. Press
to store the rate.
Example: Program a standard 5.50% discount rate.
Type/Press:
Units Decimals
To Next Page
