Programmable Printer Features
Factory Settings
When you receive the printer, its basic operating parameters
already have pre-defined factory settings (default settings for
PCL III + emulation). These are the settings which appeared
in the print test the very first time you ran it (see figure on
page XI).
The default settings for each emulation are indicated in bold
in the parameter tables and can be restored by clicking on
Default in the main window of the set-up utility.
Once you have selected your emulation, remember to
check that it is compatible with your application driver,
otherwise your printer will not operate correctly.
The factory settings for PCL III + emulation are:
Feature Default setting
Emulation
Font
Paper format
Character set
Print quality
Ink save mode
Line terminator
Perforation skip
Text scale mode
Graphic density
PCL III DJ500
Courier 10 cpi 12 pt Portrait
Din A4
CP 437 - International
Letter quality
Text and Graphic
Normal (CR=CR; LF=LF; FF=FF)
Perforation skip on
Text scale off
75 dpi
The factory settings for EPSON LQ 850 emulation are:
Feature Default setting
Font
Paper format
Character set
Print quality
Ink save mode
Line terminator
Slashed zero
Print size
Line Feed Length
Word length
Sans Serif Upright 10 cpi 12 pt Portrait
Din A4
USA
Letter quality
Text and Graphic
Auto CR
Off
Normal
6lpi
8bits
The factory settings for IBM Proprinter X24 emulation are:
Feature Default setting
Font
Paper format
Character set
Print quality
Ink save mode
Line terminator
Slashed zero
Print size
Line Feed length
Alternative Graphic Mode
(AGM)
Character table
Letter quality 1 10 cpi 12 pt Portrait
Din A4
CP 437 International
Letter quality
Text and Graphic
Normal (CR=CR; LF=LF; FF=FF)
Off
Normal
6lpi
Off
Table 2
Programmable
features
Programmable Printer Features - Factory Settings A-11
To Next Page
Loading...
