– Paper size: A4, Letter, Legal, A5 (default setting: A4
or Letter, depending on country).
– Paper source: ASF, Manual (semi-automatic).
– Paper Orientation: Portrait or Landscape.
•
If you click on Options... in the Setup dialogue box, a
further series of parameters is displayed:
– Paper Quality: Plain paper or Transparency.
– Print Quality: LQ, Economy, Draft.
– Dithering: defines the way colours are mixed (default
setting: Coarse).
– Intensity Control: increases/decreases the darkness of
graphics (default setting: Normal).
The Dithering and Intensity Control parameters are
effective only when you print files which have been
created in black and white.
Fonts
Scalable and/or TrueType fonts are available when you
operate with a Microsoft® Windows® driver, level 3.1 or
later. You will be able to print using the Windows® TrueType
fonts as well as the printer-resident portrait fonts (you cannot
use your printer-resident landscape fonts in Windows®
environment).
Print quality
LQ gives a combination of speed and good
quality
Presentation gives best quality at a lower speed
Draft gives fast printing
Economy saves ink
Paper quality
If you select Transparencies, output will be LQ, regardless of
the print quality parameter setting selected.
To close the dialogue boxes, click once on OK in the
corresponding dialogue box, if you have changed any
setting(s) and wish to confirm it/them or on Cancel to exit
without saving any changes.
To validate all the setting for your printer driver, click once on
the Close buttoninthePrinters dialogue box.
English
User Guide - Using Software 23
To Next Page
Loading...
