Supplies and Options
The following items can be ordered from your retailer. They
are packed individually and have a specific instructions
booklet.
Supplies
•
Ink jet print head with spare cartridge
•
Pack of ink cartridges
Options
•
Ni-Cd and Ni-MH battery packs (see
Using Batteries
)
•
Car lighter adapter
•
Parallel interface cable with flat connector
•
Universal AC/DC adapter + fast charger (for battery packs)
•
Supplementary AC/DC adapter
•
Colour kit (see
Ink Jet Print Head
)
•
Single colour print head
•
Infra-red infterface (item 4 on page IV).
Car lighter adapter
Using this option (item 2 on page IV), the printer can be
powered from a 12 Volts car cigarette lighter.
For the characteristics of the car lighter and its use, see the
instructions booklet included with the option.
Parallel interface cable
This option (item 3 on page IV) is recommend in order to
guarantee correct data transfer to and from the printer.
For the characteristics of the interface cable and its use, see
the instructions leaflet included with the option.
Universal adapter and fast charger
A universal power supply combined with a fast battery pack
recharger is available as an option (item 6 on page IV). This
device, which you connect to your electrical power supply,
guarantees safe, efficient battery pack recharging, reducing
considerably the recharge time and preventing overcharging.
To recharge a battery pack, remove it from the printer and
insert it in the charger. Using the fast recharger, the Ni-Cd
battery pack can be recharged in approximately 40 minutes,
the Ni-MH battery pack, in approximately an hour. If there is
a temporary interruption of the power supply, recharging will
be resumed automatically when power is restored.
Do not disassemble used battery packs and always
dispose of them in accordance with your local legislation.
English
User Guide - Supplies and Options 31
To Next Page
Loading...
