25
OIL PRIMARY CONTROL TROUBLESHOOTING
!
WARNING
ELECTRICAL SHOCK HAZARD.
TROUBLESHOOTING IS DONE WITH THE SYSTEM
POWERED. BE CAREFUL TO OBSERVE ALL NECES-
SARY PRECAUTIONS TO PREVENT ELECTRICAL
SHOCK OR EQUIPMENT DAMAGE.
Preliminary Checks:
Make sure that limit switches are closed and those contacts are clean.
Check for line voltage power on the oil primary control black and
white lead wires.
Refer to
Table 11 or 12
for further troubleshooting information
Table 11: Oil Primary Control TROUBLESHOOTING
To Next Page
Loading...
