Using the Telephone
This section explains how to navigate through the phone menus, enter phone numbers and
letters and how to make, take, end and reject calls�
Making Calls
Enter the required phone number using the keypad and then press the
adjacent key�
When a call is in progress, the handset display indicates the current duration of the
call in hours, minutes and seconds (HH-MM-SS)� The LED at the top of the base
station lights up red, continuously, when a call is in progress�
Taking, Ending and Rejecting Calls
When a call is received, all the handsets connected ring� It is possible that the caller's num-
ber will appear in the handset displays (network-dependent)� If the caller is entered in the
phone book, the name entered for the person also appears�
When you want to take, end or reject calls, use the following keys:
Take an incoming call�
End a call in progress or reject an incoming call�