Functions Available on the Telephone
Functions Available on the Telephone
This section provides information on the range of functions available on the phone�
The PIN for the handset is 0-0-0-0 in its default setting� You can change the handset
PIN at any time� Further information is provided in Section Changing the PIN on
Page 23�
Settings
You can adapt the telephone settings according to your own individual needs�
Registering a Handset
Before you can start telephoning, you must register your handset on the base station� You
can register up to 5 handsets on the base station� The handsets must support the technical
requirements for use on the base station (e�g� GAP standard)� Further information is provided
in the operating manual supplied with the respective handset�
1 Navigate to the REGISTRATION menu�
2 Conrm by pressing the key�
3 Use the keypad to enter the PIN�
4 Conrm by pressing the key�
5 Select your base station using the Navigation keys�
6 Conrm by pressing the key�
7 Press the key on the base station. The LED on the base station ashes red. The
handset is registered on the base station� This process can take a short time�
To Next Page
Loading...