26
PROTECT
SETTING UP THE BASE UNIT
Saving an SOS (Emergency Call) Number
You can store an emergency call number which is dialled
ȴUVWRIDOODIWHUSUHVVLQJWKH key or key on the
remote control.
Following this, the other stored phone numbers are
dialled in succession.
Do not save any public emergency call numbers!
8QMXVWLȴHGUHTXHVWVIRUSROLFHȴUHDQGUHVFXH
services are liable for costs!
1 Press . Memory Keys appears in the display.
2 Select the key as the required storage loca-
tion. If you have not yet stored any phone numbers,
Empty appears in the display.
3 &RQȴUPE\SUHVVLQJ.
4 Enter a name.
5 &RQȴUPE\SUHVVLQJ.
6 Enter the full phone number.
7 &RQȴUPE\SUHVVLQJ.
Testing the Telephone Unit
After having entered phone numbers, ensure that they
are correct in respect of the response in the event of an
alarm. You can trigger a silent alarm to do this.
1 Press -. Silent mode is activated.
2 Trigger the silent alarm for any sensor. The display
lights up yellow and indicates which sensor has been
triggered.
3 The telephone unit is activated.
• The subscriber called lifts the receiver and hears either
the individual outgoing voice message or standard
voice message.
Further information is provided in Section Individual
9RLFH0HVVDJHRQb3DJHb.
• The subscriber called is also requested to press digit
NH\b>@RQWKHLUWHOHSKRQH7KHVFUHHQLQJIXQFWLRQLV
activated and enables the subscriber to screen the
room in which the base unit is located.
To Next Page
Loading...
Need help?
General
