30
PROTECT
MONITORING FUNCTIONS
Monitoring Functions
You can adapt the alarm system according to your own personal needs. The table below provides an overview of how
the base unit of your alarm system reacts to each respective monitoring function when activated.
Pay attention that, in general, the warning signal is issued by the base unit. If you have deactivated the warning
signal on the base unit and there is no outdoor siren installed, the alarm system remains silent in every moni-
toring function!
Before switching any functions on, inform all the other people living in the residence regarding the location and
method of operation of the wireless alarm system.
Monitoring function Alarm signal Telephone unit (GSM)
Alarm mode Yes Yes
At Home mode Yes No
Silent mode No Yes, with screening function
Disarmed mode No No
Panic alarm Yes No
Emergency call (SOS) No Yes, with screening function
PIR At Home mode See Section 3Ζ5$W+RPH0RGHRQb3DJHb
Smoke and water detector See Section 6PRNHDQG:DWHU'HWHFWRUVRQb3DJHb
SOS / Panic alarm (remote control)
See Section Function of the
.H\RQb3DJHb
To Next Page
Loading...
Need help?
General
