35
PROTECT
MONITORING FUNCTIONS
Smoke and Water Detectors
You can set-up the base unit so that water leak and
smoke detectors also trigger an alarm when the base unit
is disarmed or in Silent mode.
1 Select the Device Setup menu option.
2 &RQȴUPE\SUHVVLQJ.
3 Select the Smoke & Flood menu option.
4 &RQȴUPE\SUHVVLQJ.
5 Select the Standard or Always on setting.
6 &RQȴUPE\SUHVVLQJ.
The table below explains how the smoke and water de-
tectors react.
Standard Always on
GSM Alarm GSM Alarm
Silent mode Yes No Yes Yes
Alarm mode Yes Yes Yes Yes
At Home mode No Yes No Yes
Disarmed mode No No Yes Yes
Function of the Key
You can programme how the base unit responds after
pressing the key on the remote control.
Triggering the Panic Alarm
You can programme that a Panic alarm is triggered after
pressing the key on the remote control.
1 Select the Device Setup menu option.
2 &RQȴUPE\SUHVVLQJ.
3 Select the Remote Key menu option.
4 &RQȴUPE\SUHVVLQJ.
5 Select the Panic option.
6 &RQȴUPE\SUHVVLQJ.
Triggering an Emergency Call (SOS)
You can programme that an emergency call (SOS) is trig-
gered after pressing the key on the remote control.
1 Select the Device Setup menu option.
2 &RQȴUPE\SUHVVLQJ.
3 Select the Remote Key menu option.
4 &RQȴUPE\SUHVVLQJ.
5 Select the SOS option.
6 &RQȴUPE\SUHVVLQJ.
To Next Page
Loading...
Need help?
General
