Chapter 3 Preparation and Inspection
51
ULTRASONIC BRONCHOFIBERVIDEOSCOPE BF-UC180F
3. Grab the tip of the balloon with the applicator. Fold the rear band back onto
the applicator (see Figure 3.28).
Figure 3.28
4. Position the rear band onto the groove of the applicator (see Figure 3.29).
Figure 3.29
5. Open the applicator wide enough to fit the transducer of the endoscope into
it (see Figure 3.30).
Figure 3.30
Balloon applicator
Groove
Balloon
Rear band