BTX III — Getting Started Guide EN-1
Intended Use
The BTX III X-ray diffraction analyzer is a benchtop system designed primarily for analyzing a variety
of powder sample types. Phase identification is obtained by comparing the diffraction signature of a
sample with a database of XRD mineral patterns.
Do not use the BTX III analyzer for any purpose other than its intended use.
Instruction Manual
Before using the BTX III analyzer, thoroughly review the BTX III User’s Manual (P/N: 10-015490-01EN).
Use the product as instructed. The User’s Manual contains essential information on how to use this
Olympus product safely and effectively. Keep the User’s Manual in a safe, accessible location.
Safety Signal Word
Indicates a potentially hazardous situation and calls attention to an operating procedure, practice, or
the like that if not correctly performed or adhered to may result in minor or moderate personal injury,
material damage, particularly to the product, destruction of part or all of the product, or loss of data.
Contents of the Case
• BTX III analyzer
• AC power adaptor
• External sample-shaker assembly
• Sample cells (1 Kapton and 1 Mylar)
• Sample cell screws (8)
• USB flash drive (loaded with software, database, and documentation)
• Power keys (2)
•Microspatula
•Ball driver
•Sample crusher
• Sample sieve
BTX III
X-Ray Diffraction Analyzer
Getting Started Guide
To Next Page
Need help?
General
