Olympus bx40 - Page 208

BXSOF
(3)
Pinion unit
REPAIR PROCEDURE
TU
NN
ААА
E-14
iv.
Apply
the
grease around
the
tip
of
PINION
@ana
arrange
the
thirty
BALLS
(2).
Ball: B1/16
Grease: OT2012
Insert
the
PINION
MOUNT
(3)
onto
the
PINION
@).
* Take care not to drop
the balls.
Arrange
the
thirty
BALLS
@)
coated
with
the
grease
be-
tween
the
PINION
()and
PINION
MOUNT
@).
Ball: B1/16
Grease: OT2012
* Pay attention not to apply
the grease on the thread of
the pinion.
Tighten the NUT@)with fingers
to the extent that side-to-
side play does not exist.
* Pay attention not to over-
tighten the nut.
Apply the adhesive to the
clearance between the NUT (5)
and the thread of the PINION Ol.
Adhesive OT1338
* Pay attention not to allow
the adhesive to flow into
the pinion mount.