Olympus bx40 - Jigs and Tools

BXSOF
F. JIGS AND TOOLS
2.
EXPLANATION
OF
JIGS
AND
TOOLS
BXKC001
①
вхксо01
©
BX50F,
U-SVR/L
©
Adjusting
Jig
to
adjust
sliding
force
of
ball
and
roller
guide.
This
jig
is
usable
for
roller
guide
and
ball
guide
adjustment
of
BX50F,
U-SVR/
L-X
drive
and
U-SVR/L-Y
drive
by
chang-
ing
the
position
of
clamping
screw-
block.
BXKC002
90
260
(a) Straight Tube Part
528
ia
ーー
7
(b) Adapter Part
216
Cr
(© BxKC002 © BX40F,BX50F,BX60F
@ optical Alignment Jig for illuminator
part of frame.
Attach to the illuminator part of the
frame and observe the cross hair of
the standard eyepiece inserted into
the standard observation tube with a
Cr:
It is composed of Straight Tube Part (a)
and Adapter Part (b).
In case of BX40F, use the only Straight
Tube Part (a).
In cases of BX50F and BX60F, use the
whole jig.
Е-2