Olympus bx40 - Page 214

BX50F
(4) Condenser height
E. REPAIR PROCEDURE
ae
SER
ae
Miti oes 04 noe
i. Move the condenser up to the
highest position.
i. Adjust the height of the PIN@
by loosening the screw. Tighten
the screw firmly and apply the
adhesive.
Screw AHU3x3SA (*1)
+
= Adhesive OT1131
Standard:
Height from the condenser's
top end to the stage surface
t = 0.08 ~ 0.12mm
Jig OT0317 (thickness gauge)
* The pin pops out when the
screw is loosened.
a
* I
1
E-28