Olympus BX53-P - Using the Controls; Stage Operation

12
BX53/51/41-P
Fig. 12
Fig. 11
1
Specimen Placement
USING THE CONTROLS
4-1 Stage
When Using the Stage Clips (Fig. 11)
Position the specimen in the center, and clamp the specimen with the
stage clips.
When Using the Mechanical Stage (U-FMP) (Fig. 12)
Open the spring-loaded finger @ and place the specimen on the stage.
Applicable slide glass is for inorganic substances (28 x 48
mm) and organic substances (26 x 76 mm) with cover glass
thickness of 0.17 mm.
Inorganic specimen
Organic specimen
@
CAUTION