27
SPECIFICATIONS
Item
Specifications
Intermediate attachment conoscopic and
orthoscopic observation (U-CPA)
Intermediate attachment for
orthoscopic observation (U-OPA)
1. Polarizing intermediate
attachment
(U-CPA and U-OPA)
Field No. 22
Bertrand lens Focusable
Bertrand aperture stop Fixed diaphragm
Bertrand lens knob
position for switch
between orthoscopic
and conoscopic
observation
Pushed in
position: { IN
Pulled out
position: ¦ OUT
2. Analyzer
(U-AN360P-2)
Analyzer slot Slot for rotatable analyzer (U-AN360P-2)
3. Revolving nosepiece
(U-P4RE)
360° dial rotation
Minimum scale reading: 0.1° (Vernier scale)
Type: Centerable quadruple
Attachable compensators: Quarter wave plate (U-TP137), sensitive tint plate (U-TP530)
and all kinds of compensators by means of test plate
adapter (U-TAD).
4. Stage (U-SRP)
Type: Polarizing rotatable stage with 3-point centering mechanism 360° horizontal
rotation, clamps at any desired position
360° scale (minimum division:
1°; minimum reading 6' by means of vernier scale)
45° click stop knob
· Stage clips (U-SCB2) attachable for holding specimen in place
· Attachable mechanical stage (U-FMP)
· Universal stage (ZEISS Co. manufacture) attachable
To Next Page
Loading...
