SET TYPE LIST
11
Entering the set type number (1–8) at system settings will set the unit information, DIC slider, the objective lens and the
mirror unit according to the set type number.
Each unit can be changed even after set type number is entered.
Unit Setting
Set Type No. Illuminator Nosepiece XY Stage Condenser EPI ND DIA ND Lanp
1–4 None U-D7REA Manual BX3-UCD8A None None U-LHLEDC
5–8 BX3-RFAA U-D7REA Manual BX3-UCD8A None U-AW U-LH100-3
Mirror Unit Setting
Set Type No.
Mirror Unit No.
1 2 3 4–7 8
1–4 None None None None None
5–8 U-FGW U-FBW U-FUW None U-FDICT
Objectives and Condenser Setting
1: BF plan semi-apo set
Applicable observations:
BF
/
PO
/
FL
BX3-UCD8A motorized universal condenser
BX3-RFAA illuminator
Top lens
Turret No. Turret No.
Nosepiece
position
Objective U-TLD 1 2 3 4 5 6 7 8
Not moved
PH
/
DF
/
BF
DIC
/
PO
1 UPLFLN4X OUT
BF
/
PO
Idle
position
PH
/
DIC
/
DF
7. Idle
position
8.U-FDICT
2 UPLFLN10X2 IN
3 UPLFLN20X IN
4 UPLFLN40X IN
5
UPLFLN100XO2
IN
6 PLAPON1.25X OUT
7 PLAPON2X OUT
2: BF plan apo set
Applicable observations:
BF
/
PO
/
FL
BX3-UCD8A motorized universal condenser
BX3-RFAA illuminator
Top lens
Turret No. Turret No.
Nosepiece
position
Objective U-TLD 1 2 3 4 5 6 7 8
Not moved
PH
/
DF
/
BF
DIC
/
PO
1 PLAPON1.25X OUT
BF
/
PO
Idle
position
PH
/
DIC
/
DF
7. Idle
position
8.U-FDICT
2 PLAPON2X OUT
3 UPLSAPO4X OUT
4 UPLSAPO10X2 IN
5 UPLSAPO20X IN
6 UPLSAPO40X2 IN
7 UPLSAPO100XO IN
To Next Page
Loading...
