Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment
in the safest possible manner.
Symbol Explanation
Indicates that the surface becomes hot, and should not be touched with bare hands.
Indicates a non-specific general hazard. Follow the description given after this symbol or in
instruction manual.
Indicates that care is required against your finger or hand being caught.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
Caution indications
Caution labels are placed at parts where special precaution is required when handling and using the microscope. Always
heed the cautions.
Caution label
positions
Lamp housing
[Caution against high temperature]
Revolving nosepiece arm
[Caution against finger or hand being caught]
If a caution label is dirty or peeled off, contact Olympus for the replacement or other inquiry.
To Next Page
Loading...
Need help?
General
