Turning the power on/off
19
Getting started
What to do if the CARD SETUP screen is displayed
When the power is turned on, the camera checks the card automatically. If
the card in the camera has to be formatted, the following screen appears.
Note that all existing data stored on the card
is erased when the card is formatted.
To turn the camera off To format the card
Press on the arrow pad
to select POWER OFF, then press
the (OK/Menu) button.
The camera turns off.
Press on the arrow pad
to select FORMAT and press
the (OK/Menu) button. Then
select YES and press again to
start formatting.
Formatting starts.
If the card was successfully
formatted, the camera is ready to
take pictures.
POWER OFF
FORMAt
CARD SEtUP
SELECt
GO
POWER OFF
FORMAt
CARD SEtUP
SELECt
GO
YES
NO
CAUtION ERASING ALL
SELECt
GO
FORMAt
To Next Page
Loading...
