Setting the date and time
21
Getting started
6
Press to select one of the
following date formats:
Y-M-D (Year/Month/Day)
M-D-Y (Month/Day/Year)
D-M-Y (Day/Month/Year)
Then press .
The cursor moves to the next setting field.
The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7
Press to set the first field,
then press to move to the next
field.
Press to move back to the previous
setting field.
8
Repeat the above steps until the
date and time are completely set.
9
Press .
For a more accurate setting, press
when the clock hits 00 seconds. The clock
starts when you press .
10
Close the lens barrier.
The camera turns off.
If the camera is left for about 1 hour with the batteries removed, or if the
battery power is exhausted, the date and time settings may be
canceled or become incorrect. Before taking important pictures, check
that the date and time settings are correct.
The date and time can also be set by the same procedure in the
playback mode.
YMD
SELECt
GO
SEt
SELECt
GO
SEt
To Next Page
Loading...
