Adjusting the color tone (White balance)
52
Advanced shooting
5
Press to select one of the
white balance modes: AUTO, ,
, or .
The white balance is set.
To close the menu, press twice.
6
Take the picture.
• The white balance setting returns to AUTO (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)”
( p.85)
• If you want a color tone that resembles what you see under tungsten
lighting, set the white balance mode to
.
• White balance may not be effective under some special light sources.
• After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
CARDSEt
CAM
PICtURE
WB
AUtO
To Next Page
Loading...
