Editing movies
80
Playback
6
Press to select INDEX, then
press .
The 9 frames extracted from the movie
appear as an index display, then the
camera returns to the playback mode. The
index picture is stored as a new picture.
To cancel the index function, select
CANCEL and press .
The index image is stored as a still picture in a different record mode
from the original picture.
Record mode when the movie is
shot
Record mode when stored as an
index
HQ SQ1 (1024 × 768 pixels)
SQ SQ2 (640 × 480 pixels)
• The interval between the frames that are automatically picked out
varies depending on the recording time of the movie.
• An index consists of 9 frames.
• You cannot create an index from movies stored on a card with a
write-protect seal.
• You cannot create an index if there is insufficient memory space on
the card.
INDEX
CANCEL
INDEX
EXIt
GO
SELECt
To Next Page
Loading...
