34
RECORDING
FUNCTIONS
3
When the current Macro mode
display indicates [OFF], press
the button once again.
The Macro mode is set and the
monitor turns on.
4
Take a picture by composing
the subject using the monitor.
Note
The Macro mode is canceled when the clear settings value is
[RESET] and the lens barrier is closed. See “Clear settings” (
p.75).
Caution
• When using the Macro mode, keep the distance between the
camera and the subject at a distance of more than 10 cm
(4 in).
• If you try to take a picture at a distance of less than 10 cm
(4 in), the autofocus will not work properly even though the
shutter button is pressed.
• In macro shooting, shadows may be conspicuous or correct
exposure may not be achieved. Always check the images on
the monitor after macro shooting.
USING THE ARROW PAD
To Next Page
Loading...
