36
RECORDING
FUNCTIONS
EXPOSURE COMPENSATION
Although the camera’s exposure is set automatically, you can vary it to
change the image brightness in the range of ±2 stops in 0.5-stop steps.
Note
• Use this function to obtain correct brightness (exposure) when
there is significant contrast (difference in brightness) in the
image.
• Set a [+] value to make the image brighter and a [–] value to
make it darker.
1
Open the lens barrier.
The camera turns on in the Record
mode.
2
Press the button.
The monitor shows the Camera
menu.
3
Select [CAMERA] using the
/ buttons and press
the button.
4
Select [ ] using the /
buttons and press the
button.
To Next Page
Loading...
