55
PLAYBACK
FUNCTIONS
AUTO PLAYBACK
You can view images stored on the card automatically in their stored order as a
“slide show”. This function is useful when you want to view images in
sequence.
1
Close the lens barrier and
press the button.
The camera turns on in the Play
mode.
2
Press the button.
The monitor shows the Play menu.
3
Select [PLAY] using the /
buttons and press the
button.
4
Select [ ] using the /
buttons and press the
button.
5
Select [START] using the /
buttons and press the
button.
Auto Playback starts by displaying
each image for 3 seconds.
To cancel Auto playback, press the
button. Press the button
again to exit the menu.
Note
•
If you display the Play menu while the monitor shows a movie,
[
] appears instead of [ ]. Auto playback can only be
started when a still picture is displayed.
• If the camera is powered by the batteries on the Auto
Playback mode, it will turn off automatically if left unoperated
for about 30 minutes.
To Next Page
Loading...
