104
5 Press the PRINT button ( ) to execute
the print.
• The camera prints the selected images.
• When printing is finished, the print
confirmation screen reappears.
• If you wish to make another print, just press
the PRINT button once again.
6 When finished, press to select
CANCEL, and then press the OK button.
• The monitor redisplays the Print menu.
To cancel setup…
You can cancel setup at Step 3 by pressing the MENU button ( ) rather than the OK
button. This will cancel all selections and return you to the initial split-selection screen.
Making a Split Print (continued)
CAUTION
• Refer to “Printing Stills on Instant Film” (p.55) for precautions you need to keep in
mind when printing to instant film.
To Next Page
Loading...
