Olympus CAMEDIA C-211 Zoom - Setting the Sleep Time

179
Setting the Sleep Time
To conserve batteries, the camera enters sleep state and turns off the monitor if not
operated for a specified period of time. (See pages 42 and 62.) The factory default
time-to-sleep interval is 30 seconds. You can adjust the interval (or disable sleep
entirely) by changing the setting here.
For details about how to use the Setup menu, see “Using the Setup
menu” on page 167.
30 SEC
1 MIN Time until sleep.
3 MIN
OFF: Sleep state is disabled.
8
Customizing the Environment
1. 1.’00
0:00
CHANGE
[
2/2
]
[
30SEC
]
Select from menu...
Select .
OK
SET
BACK
30 SEC
1 MIN
3 MIN
OFF
Make the setting...
NOTE
• Sleep state and autoplay (p.140): If the camera is powered by batteries only and the
sleep time is set to anything other than OFF, the camera will go to sleep after 30
minutes of continuous autoplay. If an AC adapter is connected or if sleep time is OFF,
the camera will continue autoplay indefinitely.