185
9
Processing Images at Your Computer
Connecting the Camera to the Computer
1 Install the CAMEDIA Master software on your computer before making the
connection.
Refer to the online instructions provided on the CAMEDIA Master CD-ROM.*
2 Switch off the power to your computer and to the camera.
3 Connect the flat end (the “A” end) of the dedicated USB cable to the USB
connector on your computer.
4 Open the connector cover on the camera, and connect the square end (the
“B” end) of the cable to the camera’s USB connector.
* Before connecting the camera to your computer for the first time, you must install the
included USB driver software on your computer. Refer to the instructions included
with the CAMEDIA Master’s CD-ROM.
USB connector
Dedicated USB cable
To camera’s USB connector
To Next Page
Loading...
