108
Creating and printing an index of a movie
When you select INDEX PRINT and press the OK button, the monitor displays an initial
index screen.
1 Select whether to create a 4-frame or a
9-frame index. (The initial setting is for 4
frames.)
To create a 9-frame index:
Push the zoom lever to W ( ).
To create a 4-frame index:
Push the zoom lever to T ( ).
• If you wish to print this display as your final
image, press the PRINT button ( ) once
(the monitor will display a confirmation
screen) and then go to Step 6.
2 Adjust the display as necessary so that
the frame you want to use as the
beginning (the top) of your index comes to
the upper left.
: Advance one frame.
: Move back one frame.
: Jump back to the start of the movie.
: Move to the final frames of the movie.
3 Press the OK button.
• The camera registers your selection. The
monitor prompts you to select the final frame
for the index.
4 Adjust the display as necessary so that
the frame you want to use as the end of
your index comes to the bottom right.
: Advance one frame.
: Move back one frame.
: Jump back toward the frame you
selected in step 2.
: Move to the final frame of the movie.
To Next Page
Loading...
